The CPC antenna cover is quick and easy to install over the factory Satellite/GPS antenna and is held permanently in place with a 3M two-sided tape. |
|
![]() |
The Antenna cover as shipped. |
![]() |
Included are instructions and an alcohol pad to clean the surface. |
![]() |
Here is a shot of the antenna cover. |
![]() |
A shot of the bottom. The factory antenna sits up inside here. |
![]() |
Take a last look at your factory satellite antenna. |
![]() |
Take some painters masking tape and mark the location because once you uncover the sticky part you can not lift it up. |
![]() |
Clean the surface around the satellite antenna with the alcohol cloth. |
![]() |
Pull the 3m covering off the bottom of the cover. |
![]() |
Set it down carefully with both hands and then press down gently. Bonding will take about 24 hours. It would be best to not expose your car to harsh weather. The best would be to not even drive it. |
![]() |
Gently remove your masking tape and then let the car sit for 24 hours. I planned this install for the evening so it could sit all night and the next day. |