DG Custom Auto Radiator Cover Install

DG Custom Auto Hydro Carbon Radiator Cover
DG Custom Auto Hydro Carbon Radiator Cover This one single upgrade can really make your engine compartment look vastly improved. The Guys over at DG have a hydro dipping tank that allows them to dip many different types of items into it for this customized look and feel. It holds up much better than paint and will not fade. Its really worth the money
Wrapped Radiator Cover Time needed: (10 to 15 minutes)Tools Required:

* Flat head screw driver
* 10mm socket

The DG guys know how to ship these items so that they arrive in perfect condition.

Hydro Carbon Radiator Cover Right Detail Hydro Carbon Radiator Cover Right Detail
Hydro Carbon Radiator Cover Center Detail Hydro Carbon Radiator Cover Center Detail. Note they do not put their sticker on every unit.
Hydro Carbon Radiator Cover Left Detail Hydro Carbon Radiator Cover Left Detail
Factory Radiator Cover The factory radiator cover. I already replaced my hood prop with gas struts so I do not have directions on that step. Its very simple removal with just one bolt.
Remove Tabs Remove the 8 tabs. Start them with a screwdriver. Pull them out with your hand. When you have all 8 out then pull off the cover.
Cover In Place Place new cover in place. It just sets right in.
Replace Tabs Put the 8 tabs back on. Don’t worry if they became separated. Place the holder half in firs then push the retainer tab down in.
DG Custom Auto Hydro Carbon Radiator Cover On Here is a shot of the DG Custom Auto Hydro Carbon Radiator Cover on with all tabs back in place.
DG Custom Auto Hydro Carbon Radiator Cover Detail DG Custom Auto put on this logo. They do not place this on all the radiators covers they sell. Overall the radiator cover looks great. Also note that they can apply any custom artwork on to your mustang radiator cover with the hydro graphics tank they have.

Trackbacks/Pingbacks

  1. DG Custom Auto’s Mustang Hydro Carbon Radiator Cover | A 3.7L V6 Mustang Owner Resource for Modifications and Repairs - February 2, 2011

    […] out the full Mustang Radiator Cover Install […]